Basic Bioprocesses Engineering
Code: 100960 ECTS Credits: 6| Degree | Type | Year |
|---|---|---|
| 2500253 Biotechnology | OB | 2 |
Contact
- Name:
- Antonio Sanchez Ferrer
- Email:
- antoni.sanchez@uab.cat
Teachers
- Antonio Javier Moral Vico
Teaching groups languages
You can view this information at the end of this document.
Prerequisites
There are no incompatibilities.
Objectives and Contextualisation
The general objective of this course is to learn the principles that govern the biotechnological processes carried out at full-scale.
Specific objectives include:
1. Perform the balances of energy and mass involved in these processes.
2. Use the phenomena of heat and mass transport associated with these processes.
3. Interpret the flow diagrams in which these processes are represented.
4. Use properly the units used in mathematical expressions.
Learning Outcomes
- CM19 (Competence) Calculate material and energy balances in bio-industrial processes.
- CM19 (Competence) Calculate the material and energy balances in bioindustrial processes.
- KM19 (Knowledge) Define the units, variables and characteristics of the phenomena of matter and energy transport.
- KM20 (Knowledge) Define the diversity of separation processes at different scales in bioprocess engineering.
- KM20 (Knowledge) Define the diversity of separation processes at various scales in bioprocess engineering.
- SM19 (Skill) Use a bioreactor appropriately.
- SM19 (Skill) Use a bioreactor appropriately.
Content
1. Introduction.
1.1. Units systems
1.2. The international system of units
1.3. Numerical methods
1.3.1. Search zeros in nonlinear equations
1.3.2. Differential equations
1.3.3. Numerical integration
1.3.4. Numerical derivation
1.3.5. Interpolation and adjust
2. Mass balance without chemical reaction
2.1. General systems. Simple cases
2.2. Calculation basis. Complex systems
2.3. Non steady state
3. Systems with chemical reaction
3.1. Concept of conversion and yield
3.2. Isothermal chemical reactors
4. Energy balance
4.1. Global Balance
4.2. Heat energy
4.3. Energy in chemical reactors
5. Transport phenomena
5.1. Bases
5.2. Transport coefficients
*Unless the requirements enforced by the health authorities demand a prioritization or reduction of these contents.
Activities and Methodology
| Title | Hours | ECTS | Learning Outcomes |
|---|---|---|---|
| Type: Directed | |||
| Type: Direct | 1 | 0.04 | |
| Type: Direct | 30 | 1.2 | |
| Type: Supervised | |||
| Type: Supervised | 15 | 0.6 | |
| Type: Autonomous | |||
| Type: Autonomous | 30 | 1.2 | |
| Type: Autonomous | 66 | 2.64 |
Methodology combining different activities:
Classes of theory: it is a master class taught by the theory teacher who, in some cases, has audiovisual support that is available in the Virtual Campus of the course. In classrooms, it is possible to propose practical examples.
Classes of problems: that will focus on lesson problems that are presented in the Virtual Campus of the course, with different grades of complexity. The problem-solving classes will consider a limited number of problems. Apart from these problems, other ones are at the disposition of the students to do them autonomously. Also, blocks of more problems are at teacher's disposition and in the bibliography of the course.
It is important to note that some of the problems require a numerical resolution that exceeds the ability of the students. For this reason, in Theme 1 is presented a software to help the student to solve them. The software is presented in a specific session.
Theory classes are done in a single group, whereas the classes of problems are divided into two groups (A and B). The student has to consult in which group is included.
Annotation: Within the schedule set by the centre or degree programme, 15 minutes of one class will be reserved for students to evaluate their lecturers and their courses or modules through questionnaires.
Assessment
Continous Assessment Activities
| Title | Weighting | Hours | ECTS | Learning Outcomes |
|---|---|---|---|---|
| Activity 2 | 25% | 2 | 0.08 | CM19, KM19, SM19 |
| Activity 3 | 25% | 2 | 0.08 | CM19, KM20 |
| Activity 4 | 25% | 2 | 0.08 | CM19, KM19, SM19 |
| Deliverables | 25% | 2 | 0.08 | KM19 |
The evaluation system is based on a continuous assessment that combines different activities:
Continuous assessment activities: 100%
• Activity 1 (Test Unit 1): 25%
• Activity 2 (Test Unit 2): 25%
• Activity 3 (Test Unit 3): 25%
• Activity 4 (Test Unit 4): 25%
To pass the course will take a minimum of five as the average grade of the continuous evaluation. All activities must have been evaluated. Students who do not attend an activity will be evaluated with a 0 in that activity.
Students that do less than 3 activities will not be evaluated. Students who fail the course with continuous assessment can make a final examination, including any part of the course and calculated in 100%.
Students who wish to increase qualification can also do this final examination. In this case, the qualification of the continuous assessment will not be considered. The minimum grade to pass the final exam is again 5.
Without prejudice to other disciplinary action deemed appropriate and in accordance with the academic regulations in force, it will qualify with a zero irregularities committed by the student that may lead to a change in the qualification of an act of evaluation. Therefore, to copy any assessment activity will imply not to pass the course.
This course does not include unique evaluation system.
Bibliography
Elementary principles of chemical processes. Felder, Richard M. New York, Wiley, cop. 2000.
(Principios elementales de los procesos químicos, Felder, Richard M. México : Limusa Wiley, cop. 2003, 3ª ed.)
Doran, P.M. (1995). Bioprocess Engineering Principles, Academic Press, London.
(Principios de ingeniería de los bioprocesos, Doran, Pauline M. Zaragoza: Acribia, cop. 1998)
Himmelblau, D.M. (1974). Basic Principles and Calculations in Chemical Engineering, 3rd edn, Prentice-Hall, New Jersey.
(Principios básicos y cálculos en ingeniería química, Himmelblau, David M. México: Prentice-Hall Hispanoamericana, cop. 1997, 2ª ed.)
Perry, R.H.; Green, D.W. (1997). Perry's Chemical Engineers' Handbook (7th Edition).. McGraw-Hill.
Díaz, M. (2012). Ingeniería de Bioprocesos. Paraninfo.
Software
THe student should use some software for the resolution of numerical problems.
Language list
| Name | Group | Language | Semester | Turn |
|---|---|---|---|---|
| (PAUL) Classroom practices | 421 | Catalan | first semester | afternoon |
| (PAUL) Classroom practices | 422 | Catalan | first semester | afternoon |
| (SEM) Seminars | 421 | Catalan | first semester | afternoon |
| (SEM) Seminars | 422 | Catalan | first semester | afternoon |
| (SEM) Seminars | 423 | Catalan | first semester | afternoon |
| (SEM) Seminars | 424 | Catalan | first semester | afternoon |
| (TE) Theory | 42 | Catalan | first semester | afternoon |